Before you read this impression, I really recommend going back and reading the original impressions on the Razor. I only intend to cover the new stuff and most of what I talk about in the previous post covers building the Razor now.
It’s taken a while but the Razor is now available from the Spectre website! Although it’s currently out of stock due to everyone buying them, they are now actually on the site. In addition, there are now crew and stowage available so you can make your vehicle look even more operator. We’re going to take a look through these new arrivals, and then have a quick update on my own Razors.
Building the Razor that arrived in the post was almost exactly the same as in my original post. I had to do a little clean up on the parts (you can still see the flash in the picture above) and I had to fix a cracked mud guard. Apart from that, the various pieces assembled easily. It was helped by the instructions now being online which mostly matched up to my procedures
There were a few things I tweaked but these were mainly due to the other releases that came out the same day. Primarily, I left off the seats, roll cage, steering wheel and GPMG. The other thing I left off is what sits in front of the passenger to make it match up with my pre-built one. I think it’s a handle (something to hold onto as the driver guns it) but I think the original part went missing somewhere between the Salute showfloor and my flat.
The first new addition is the Razor Stowage pack. The pack contains three items (two jerry cans in storage racks and a spare tire on frame). Both objects come with mounting brackets designed for specific places; the spare tire clips onto the top of the roll cage while the storage racks slot into the slits on either side of the cargo frame. However, you can easily trim them down if you want to place them somewhere else, such as cutting the supports off the racks so they can be placed on the rear gate of the cargo bed.
As for the looks, it really makes the Razor look a lot more suited for the off-road life and less civilian. The design features of the elements (in order to help place the items) is really smart and helps a lot with placement without giving a hard and fast “ITEMS MUST BE PLACED IN THIS LOCATION”.
The other major addition is the crew. Unlike the technicals, the Razor is open to the elements and so really requires crew figures for use on the tabletop (it’s a bit strange rolling an empty buggy around the world). The two crew packs give you four figures in total; Alfa with the front crew (Driver and Gunner) and Bravo with the two guys sat in the cargo bed. Splitting the crew into two packs let you easily pick the crew you want, especially if you want to fill the rear cargo section with some form of cargo without having spare figures left over. The figures have the same shapes on the bottom of them that match up with the seats so that the crew fit in the correct place. The crew designs fit with the rest of the Spectre range, looking closest to the Task Force Operators or Rangers collections.
Now, the crew do come moulded into the seats and this was a minor annoyance as someone who built up their vehicle before they were available. However, after having seen the final product, there is no way I’d have wanted the figures separately as you would not have been able to get the same level of posing as these guys have. It’s cool how the crew members actually feel part of the vehicle (such as the driver with one foot on the outside of the buggy) rather than just resting on top of it.
Fitting the steering is a pain in the neck and the getting the GPMG into location required some careful balancing of three separate pieces. But overall, these guys are a must buy if you have a Razor that you intend to have rolling round the battlefield
So that’s cool for everyone else but what am I doing with mine?
So first thing – I made my first Razor before the crew were available and so it’s fitted with the seats. This means that without serious surgery (not something I want to try on resin) I can’t mount crew on it. But this gave me a plan. Razor 1 would become the dismounted version, ready for use as an objective or when the team dismounts. Razor 2, the brand new one, would get the crew figures. I would then make sure both had the same arrangement of gear and spare tires and paint them up in the same way.
This did throw up a minor issue. On Razor 1, the GPMG is stowed against the side of the cargo deck (primarily to make sure there isn’t a fragile piece of metal sticking out at a right angle). On Razor 2,this GPMG is now in an active position as the gunner starts hammering away. This leaves a giant empty space on the side of the vehicle where I can’t mount a rack as it wouldn’t match. However, the other release of the week came to the rescue. I stuck a bag over the space on Razor 2 – the thinking is that the team has grabbed their assault pack after dismounting (hence why it’s missing on Razor 1). It’s a cool little thing that no one apart from me will notice.
The next step was painting. Both the vehicles got a black undercoat and then followed by a desert tan spray. I then painted the details. I also painted up the crew using the new multicam pattern separately from the vehicles so the shadows on them would still be black. I then got the joy of assembling them onto a mostly finished buggy. This is a painting method I hate but in this case I think it was the best option.
As you can see in the photo above, I didn’t quite finish them before going to press. However, I should have them done for Monday’s Wargaming Week.
Conclusion Part 2
The Razor is an exciting kit to build and looks great when finished. However, I think the additional packs really make it. The stowage gives them a cooler feel while the crew is basically vital. Total cost for a fully equipped Razor (buggy + both crew packs + razor specific stowage) is around £33 which is quite expensive for such a small vehicle. However, it is packed full of detail and makes a nice centerpiece/tactical option for an elite force of operators.
Looking ahead, I hope we get more stowage and alternative crew poses. The rules page has some interesting points on it (such as a mount for heavy weapons on the roll cage which seems nuts) and even mentions some more variations on the Razor design. As I said in the first impressions piece, the Razor shows off a super exciting and interesting direction of releases that Spectre can go in.
If you are wanting your own Razor and accessories, you can all the bits over at https://www.spectreminiatures.com/collections/vehicles