As a modern wargamer bogged down in endless tiny conflicts in the Middle East, it can occasionally be difficult to find suitable buildings to fight through. Many I’ve covered here, but otherwise, you’re stuck picking up a whole host of generic adobes that don’t quite have the same feeling as the built-up and developed areas of key cities in the MENA region.

One key element of the more well-to-do areas in many of these places are walled compounds, either around public buildings and richer families. Differing from the adobe walls of the rural region (mostly through the visual side), these walls provide a very interesting set of challenges for a wargaming commander, forcing troops into killzones or requiring the use of tactical equipment to cross them.

In partnership with Footsore North America (formerly SASM), Sarissa Precision has released a range inspired certain compounds in Libya. To nitpick, technically the design on the buildings is closer to the CIA annex rather the main Ambassador’s compound immortalised in 13 Hours. However, no matter what the inspiration is, they do provide an easily purchased way to build up your own modern-day compound to storm/defend.

Walls

The key feature of any walled compound is, of course, the walls! Comprised of three pieces of MDF and two slices of greyboard, assembly on these sets are super easy. Wide piece at the base, thin piece at the top, place greyboard on each side. Done in literally 2 minutes. The wall segments are each 8 inches long and you get four of them in the separate packs (although only two of this smaller size are included in the Walled Ambassador’s Residence Set).

The main comment about these walls is the height. These are not minor obstacles, there are taller than a man and would require teamwork to cross. They would definitely do the job for marking out a protected building or just catching the eye when setting the table up.

I could also see them being easily modified with a few additional touches. Treadheadz on facebook has done some breached walls (something I may do with one of my additional sets) but there are plenty of other little tweaks. For example, some razor wire could easily be strung along the top if you really don’t want any visitors.

Posts

Of course, the wall panels above may look sturdy, but without proper support they will fall over to even the most minor explosive or errant arm. for this reason, most of the kits in the range include a common post design. The other elements have a pair of hooks on each side, that in turn slot into the posts for stability. The elements are also designed to match the base of the posts, removing any unwanted gaps in the base.

The vertical component of the post are actually four matching pieces. Two of them have slits cut to take the element hooks, while the other two are bare. The slitted portions have a pin that goes into the base, while their counterparts protrude slightly upwards, slotting into the top portion before being covered by a topping piece. By default, the posts are designed to be assembled as passthrough supports, connecting opposite sides to extend the walls.

However, it is important to note that the base has four slots that the bottom pins can fit into. This means that, if you wanted to add some variation to the look of your compounds, you could assemble the posts to make some right-angled turns or even create a T-shaped arrangement through the use of upright pieces from other posts. This does require a little modification, shaving down the top prong seeing as there is no longer a slot to slide into.

Corners

You could simply assemble the posts detailed above to create the corners of your compound, but the more visually pleasing (and more accurate) version is included in the kit. These curved walls are really clever in terms of construction, letting you have the curved shape, without losing the sturdiness of the rest of the MDF kits.

Rather being entirely MDF, only the core structure (the two end walls, the base and the roof) are made from wood. The actual curve is greyboard, with two interior pieces clamped between two exterior pieces. The design works really well – I’d also add the interior pieces can be put in either way around with no issues (the outer pieces covers any gaps).

Entrance

Of course, every compound needs an entranceway. And with this being a secure compound, it needs the proper place to check over anyone who approaches. The entrance is actually made up of several pieces, all tied together with the same hook and lot posts used in the rest of the system.

The main focus is, of course, the gate. A baseboard with two pillars attached (with slots on both sides for alternative uses), the actual gates themselves can swing freely letting you open and close them as the game requires. They can also be easily removed for storage (or if someone decides to risk ramming them mid-game). The gate style is definitely wrought iron and simple, but you could easily replace them with something different thanks to the ease of removal.

As well as the main gates, there are also two corner pieces. One is a normal corner piece (as detailed above) but the other is an armoured gate house. This has an internal door and an external window beside the gate. Much like the other corner pieces, it’s a similar construction

Now you may notice, I made a bit of a mess with it. I hadn’t realised that the inset piece is supposed to be a locator piece for the roof. I, of course, didn’t realise this until I’d glued it all together and then realised there was no way to access the interior. So I had to take a claw hammer to it to break the super glue before assembling it the correct way around. Luckily my textured spray paint should help to cover up the mistakes.

The entrance pack also includes an extra-long wall piece to match the gate assemblies size. This means you can easily assemble a square compound, without needing strange sizes of MDF wall. Apart from the size, it’s exactly the same as the normal walls.

Residence

Of course, there is no point in assembling an enclosed compound if there is nothing to enclose. The compound comes the Ambassador’s Residence, a medium-sized open-plan building with plenty of room on the room for a last-ditch defence.

So this was the midpoint of assembly and honestly, it was a pig getting the basic frame together. Things snapped, slots didn’t align and in the end, I swore quite a lot. I assume most of it was down to my own cackhandedness rather a particular design flaw, but be aware when assembling just in case you end up with a few missing elements to the doorways.

On the other hand, I am a big fan of how the edge of the roof is assembled. This is made out of three pieces of MDF per straight section. A central structural piece goes in first, followed by an outer piece (using the extended pegs from the roof) before a final, interior detail piece is added. I really like the effect this has – the roof feels like it has some real depth to it.

In addition to the main building, there is also a small single-room building. As you can see in the picture, it’s designed to be placed on top of the main building, taking the role of some rooftop quarters or interior access. However, I personally think it looks a little cramped, especially once figures, details and scatter are placed on the roof. This shed will definitely end up being used as a separate annex building.

Finally, a few touches I just had to mention. Both roofs have a ventilation unit in place. Although super simple (5 pieces of MDF, 4 of which are the same) I think it really adds to the look of the rooftop. Similarly, there is also a solar panel setup included on the sprues. It’s free-standing, so feel free to place it anywhere.

So that’s all the pieces, what does the compound as a whole look like? Well, here it is, along with a WIP vehicle and civilian to get a sense of the scale.

Assembly of the final compound is super simple. Using the hook and slot system, you just need to clip each piece together until you’ve connected them all up. The slots can be a little tight but I’ve not yet felt like something is about to break while building. There is also a useful amount of flex/give in the pieces once all put together – not enough for players to notice, but still easy to actually get everything apart again at the end of the night.

Overall the basic compound rough fills a two foot square on the board. This size definitely feels a little snug in my opinion, ideal for a single focus building (like a medium-sized house) and maybe. It does not fit anything like the Knights of Dice apartment blocks in its current state but can still fit some of the larger buildings from Sarissa’s other ranges (such as the colonial buildings). With the items included in the box, I’d also say it’s a little on the small side if the compound is the sole extent of the playing area. Without much dead ground to fill with scatter, games will end up being very short or not particularly interesting. This, to me, feels like a compound that plays a part in a larger table, without overstaying it’s welcome – somewhere for the players to be fighting to, from or alongside rather than just through.

Of course, this is just a bundle. You can buy all the various pieces separately – the wall pack, gates and corners all include plenty of posts while more of the residences would let you add additional structures in this style to your game. I have two sets of walls, a set of corners and another entrance gate. By using all of these, I should be able to assemble two of the normal-sized compounds or simply extend one out to a larger size, allowing for fighting actually inside the walls. Expect another article soon, once I’ve assembled all the various bits of MDF lying around my flat and have made some giant compounds.

Final thoughts? I think this is a great kit for anyone looking to play modern wargaming in a more built-up area. Being able to buy a series of walls that can be easily re-arranged and stored is a great time saver. The style of the kit could fit into most places in the modern world, not just in the MENA region. So no matter if you’re assembling a drug lord’s palace in South America or building up an embassy to be defended, I think this is definitely a range worth taking a look at.

Way back in the November of 2017, I wrote an initial impressions of the Knights of Dice Tabula Rasa range. And approaching two years later… I haven’t advanced very far. However, Knights of Dice has continued to work, producing much more in their ranges. One thing especially interesting for me, however, is the Tabula Rasa villa range. As someone who is starting to really like buildings, you can actually fight through rather than just around, adding some larger multi-room buildings should help to make my games more interesting.

As a rough overall point, all three buildings are wonderful things to assemble. They pop easily from sprue, with very little work needed in terms of clean up. The construction is also nice and easy, in many cases tight enough to dry-fit the entire thing before only adding a little glue to secure them . One comment is that the sprues this time around are definitely on the larger side to support the larger footprint for the buildings, so expect some larger delivery boxes.

I did have a few issues with some missing pieces from the sets. None of these would have stopped construction (a missing step and a barrier) but both could be easily replaced from offcuts. In addition, Knights of Dice support is fantastic so missing pieces will be quickly sent out.

Above you can see the rough scale of the doors and windows. You can also see the details – these buildings are really just shells, lacking in pretty much all detail except structural elements such as interior walls and staircases. This is not a negative, it’s just pointing out the feature of this range.

Most importantly, stairs! In the original review, I picked out the almost smooth stairs a major negative. Well, it seems that KoD heard all about it and decided to tweak them to make them look a little more playable. I think the compromise makes them playable while not ruining the look.

Pictured here on the left is Compound 1 from the original release next to the villas. As you can see, the new buildings are on a larger footprint, with much larger second floors and often access to the rooftops. They feel a lot more like some of the hard work is done to make them into interesting games.

Villa 1

The first building up is a two-storey structure with access to the roof. This building looks like some town centre building, with a covered outdoor walkway and flat roof above. The interior is split into several rooms, two on each floor.

The pack also includes a removable ladder, ideal for quickly accessing the roof. You can also see just how many firing positions this building has, perfect for defending and a nightmare to assault.

Broken down you can see just how much floor space is available. Although only two rooms per floor, there is plenty of space to move through, with plenty of choke points to fight through. Additionally, I like the stairs having a little cover when you climb them.

Villa 2

Villa 2 is a bit more modern, offer a two-storey building with balcony and roof access, ideal for sunbathing, filming enemy forces or siting a heavy weapon.

Interesting to note, this building only has two ground floor doors on this side which could be an interesting tactical challenge. This building also supports the ladder from building 1, if you want to vary it up.

Broken down, you can see this building is mostly larger rooms, with the upstairs being only one interior room before leading outside.

Villa 3

Villa 3 is a bit of strange one. Apart from the very different style and fancy steps, this feels like a building from the original releases. However, with the sloping roof and elevated window, it is pretty distinctive on the tabletop.

Looking at the rear, you can see the side entrance. This passes under the stairs, which I should warn you includes a perfect hidey hole for ambushing assaulters.

Broken out, both floors only have a single large room. It’s also interesting to note that both floors have blind spots the other floor manages to expose – something to think about then placing them.

Villa 4

Finally, VIlla 4. This one looks and feels like a very modern building, a gently sloping roof combined with an exterior balcony

The backside shows the entrance locations and the multiple windows, as well as a better shot of the gently sloping roof angle. As you can see, there are plenty of firing points on this side, making assaulting it a genuine challenge.

This is probably the busiest of the four buildings, with a total of 5 rooms and a balcony. It also provides multiple entry points. on the two floors (ignoring the action movie technique of setting up a ladder onto the balcony itself. The two smaller rooms at the back of the house will be pretty interesting to take control of, especially without grenades.

Conclusion

So what do I think of them? Well, I love seeing the improvement to design these buildings show – they feel like Knights of Dice have learned from the original release and these now feel more like real buildings. As I keep banging on about, having buildings you can actually CQB through, rather than just treating as “occupied” or “unoccupied”, really lifts games from just simple skirmishes to feeling much more interesting.

At the same time, these are Tabula Rasa buildings. If you want something you buy, spray paint and then put on the table then I don’t think these are necessarily the best idea. They would be fine but they are really asking to have all the little detailing work, to give them that extra touch. But that said, I think these are the perfect starting point to just go wild with it.

Now, time to go get some more air con units and and bits of plasticard…

As a man with a sizeable collection of unpainted MDF, making it tabletop ready requires a big chunk of time and special techniques to get it ready for the tabletop. Between getting the right texture on and making sure the Agrax is deployed enough without bankrupting you, it does all build up. So the idea of purchasing pre-painted MDF can be pretty attractive.

There are a few companies doing it but the selection for gaming in the Middle East or North Africa is pretty limited. Luckily, Black Site Studios in the US have kicked off their War Zone Arabia range, bringing a load of buildings to fit the Middle Eastern zone. Spectre Miniatures were offering a pre-order on their products in the UK for a limited time and I just had to pick up a trio to try out.

First of all, let’s talk the basics. All the buildings arrive in a mixture of MDF and greyboard, laser-cut into pieces and ready to be popped from the sprue. Most of the building Sprue removed was relatively easy, although I did find a good few cases where some clean-up had to be done after removing from the sprue. Overall the kits all feel very nicely designed and well manufactured.

Instructions are available from the Black Site Studios website and are simple and easy to assemble. As with all MDF buildings, I really recommend dry-fitting everything, making sure they fit properly before applying the glue. There were some really snug fits, especially with the interior and exterior walls being separate pieces and needing to fit together. In a few cases, a little bit of percussive construction assistance was used just to make it all fit. However, aside from one piece seeming to need to be reversed, everything fitted together well, with tools only needed for a little bit of clean up. On the other hand, I need to stress that you should definitely read the instructions – I ended up skipping the outer decorative pieces when assembling the largest building and ended up unable to assemble them as intended (as you can see in the picture at the top).

For all the positives I do have to give a warning about the staircases. They are a monster to assemble, requiring the lining up of several steps and their locator pins between two outer pieces. I assembled three sets in the course of these buildings and each one was incredibly annoying. Additionally, the steps seem to be designed for figures mounted to penny bases, with incredibly small gaps between them. For everyone else, you either let the figures slip and slide or else just make sure people stand at the top and bottom of the staircases.

The first building I constructed is the Abboud Trading Company. The smallest of the buildings available, the building is a perfect store for your MENA street. With a roll-up door over a wide entrance, it’s easy to picture it being rolled up as the day starts, various goods waiting inside to be bought and sold. Alternatively, this may be where the HVT goes to ground, operators moving up to breach through the door and drag them out.

Around the back, you can see an additional entry, making the building perfect to fight through and presenting a challenge when defending. Additionally, the low walls on the partially assembled roof leads to some interesting fighting positions.

As you can see inside, there is a serving counter between the main door and the roll-up access. There is enough space to roll in a vehicle, letting you use this as a handy garage to hide key objectives in. Additionally, there is plenty of space inside for players to move around and actually fight, even on standard-sized 25mm bases. This is a common theme across all the buildings I noticed.

The next set is Turhan Imports. A single large room with staircase access to the roof, this building actually works really great when sat next to the trading company or assembled into a small compound. A big feature of this building is the cracked plaster on the other walls, the cream coloured greyboard placed over pale MDF brickwork. I think it works really well, especially from tabletop height.

At the rear, you can see one of those dammed staircases I mentioned further up. As you can see in the breakdown below, this piece is separate, letting you replace it with a ladder if you want to adjust the look. One thing I will mention is the piece of plaster you can see on the staircase. These pieces were not on the instructions, perfect for making each building look different. I think this is especially important if you were running multiple buildings on the same board.

Broken apart, you can see the building is a single large room. One trend through all of these is that the buildings ask for plenty of interior elements, a scattering of tables, sofas and chairs ready to be flipped for cover when people breach and clear.

Finally, lets take a look at the Temara Safehouse. And Oh Boy.

This building is huge. Like, seriously huge. With a footprint of over 1′ x 1′, you could very easily use this building as a game board all by itself. With multiple entry points, access to both floors and interior rooms, this is an assaulter’s nightmare.

As you can see on the other side, there are plenty of access and firing points to utilise. You can also see some of the incredibly nice detail work that is a stand out element of these kits. From the windows to the guard rail around the roof, these buildings definitely feel the part while also definitely being different from the rough adobes that are the go-to for the Middle East.

Now, this really is the money shot. By taking the building apart you can see just how much space for activities there are inside. Three rooms on the ground floor with two more above gives you plenty of spaces to sweep and clear. In addition, you can see the first floor has two staircases to allow access. Overall, this is one hell of an addition to any terrain range.

Overall, I am very impressed with the Black Site Studios buildings. Ignoring the fact the design of these constructions filled my brain with thoughts of Insurgency Sandstorm’s urban conflict zones, there are plenty of really nicely designed bits to them. Each building feels evocative, both fitting the range but also feeling something unique. I’m also a fan of them being very playable – opening doors, sensible access to all the rooms and space to move through, rather than just cramming figures in. The variety through the three buildings is also pretty spectacular – I’d love to see where else this range could go.

Am I going to throw all my unpainted buildings aware and swear only to buy prepainted? Honestly, no. I think these do an excellent job of letting you get past the painting stage and ready for the table, but I think I’ll be going back and painting these. It really comes down to two things – texture and me being a cack-handed fool. Spray-on texture just makes the MDF pop while a good paint job helps to cover up places where I made a mistake during assembly or let the glue on fingertips attach themselves to the greyboard. However, if this doesn’t interest you (or you can assemble them without being a moron) then I think these buildings are a fantastic purchase.

Now someone stop me before I buy all the compound walls I can cover myself in…

It’s time for a new project! With the completion of Operation Dragon’s Hoard, my scenery projects have run dry (and less full of downed planes and dust). However, that doesn’t mean my terrain collection is all good to go. Since I started wargaming, I’ve slowly been collecting more and more MDF, all ready for a day when I run a full size game set in a city (as planned for a future part of the CGS series).

As you can see by my picture of shame taken in March, there is a lot of MDF to paint. And what’s worse, it’s all assembled (due to me mainly wanting to write about it) so painting is going to be interesting. To help with that, I’m organising it into a new project. Nicknamed “B-Town” the aim here is to assemble, modify and paint all my MDF to make it suitable for a modern day urban area somewhere in Bazistan/Aden. The target is to use this process to learn modification techniques to turn simple MDF into more detailed structures, learn painting techniques to get the terrain painted quickly and effectively and work on assembling the required scatter terrain to really make the scene look more realistic and interesting to play over.

This project is going to take a while and I’m sure I’m going to find ways to keep adding to it but for now lets start by taking a look at a few new purchases.

In my initial look at the Sarissa’s North Africa/Colonial Range, I focused on the big boys – multi-storey and street filling structures that are specific to range. However, there were also a few smaller buildings that Sarissa offer that I hadn’t picked up in the initial order. After having built the others I realised that maybe I should pick some up to use as prototypes for painting – after all, I’d rather ruin at £10 building than one of the larger ones.

As before, both kits arrived in the usual Sarissa packaging. It was interesting to see that the small building was only on A5 MDF rather than the cut used for all the others. Quality was high as ever and assembly matched pretty closely to the kits covered in part 1.

Small House

The first building in this set is the smallest building in the range. It’s also super simple – two doors, five windows and a lift on/off roof.

The rear view shows more of the access points as well as some of the laser cut details

With the roof removed, you can see the interior. It’s a simple single room with two entrance ways. I had an issue where one of the greyboard panels where it seemed reversed but managed to fix it by trimming out the

House – Two Storey

Building 2 occupies a similar footprint but extends it with another floor, including a balcony.

As you can see from the rear there is an additional door onto the ground floor. It’s interesting to see that there are no side windows on the ground floor, making it easy to outflank but limiting entry.

Like other buildings in the range, the interior are empty cells. An interesting note is that due to the same plug system used for the room, the ground floor could be replaced with the one storey house or the two storey could be converted into a single – with two doorways, it’s perfect for a security office in a compound.

Picking up these two buildings, really started to let me see some of the possibilities you can get with this range. Although the large buildings are very impressive, multiple small ones will help to quickly make any neighbourhood large, especially as they could be used in a modular fashion to make a wide variety of different buildings. I’m not going to rush to pick up more but it’s something to think about for the future.

Of course, I can’t leave you with just a simple impressions piece. In between my time at work, I managed to get some paint onto buildings. As planned, I’m starting with the smallest Colonial building to work out my method.

Due to the fact I’m working with buildings that are already assembled in this project, I can’t start from a sensible place like base-coating on the sprue. Instead, I’m having to mask areas I’m not wanting to cover in textured spray, such as doors and windows.

So here is my process for the first building. It’s not 100% finished – I’m still debating adding window glass on the inside.

1. Assemble
2. Mask off windows and doors
3. Textured spray with roof on
4. Remove masking pieces and roof
5. Spray Black Undercoat
6. Spray Grey Undercoat
7. Spray White
8. Dusting of Tan spray on the lower edges
9. Paint doors with a dilute blue to bring out the lasercut detail
10. Nuln Oil wash for vertical surface, Agrax Earthshade for the flat surfaces
11. Roughly paint/drybrush white
12. Apply scrunched poster, hit with a Nuln oil wash

For a first attempt I’m reasonably happy. There are a couple of things I’m going to tweak. First of all, I don’t think I need to spray black AND grey. The grey is pretty dark and it covers the main role of the black (covering up the black and white of the textured spray/giving the same “dark up” feel that my figures have). The poster is something else – I think I over handled it causing it to tear and smudge. A layer of wash was needed to stop is standing out too much but I used a dirty brush. Next time, clean between uses.

The big thing is I’m going to take a bit more time on future spraying. I painted up these relatively quickly (probably 1.5 evenings) which meant I didn’t leave the spray paint long enough to settle. This lead to some odd textures and cracking you can see if you look closely. If anyone asks, it’s just the plaster cracking. Another tweak will be to change the final finish colour – looking at buildings in Yemen (the geographical area of Bazistan) and there is a nice mixture of colours from white to shades of brown. Due to the fact the buildings share many of the same features, a colour tweak will make the city look a bit more varied.

What’s next?

The next part of the project is going to work on the other colonial buildings so I can have a core set of buildings painted up. However, I need to look into some detailing parts to help them look more modern such as air conditioning units, metal bars around the windows, wiring and aerials. I already have a few but I want to expand my options and see what is out there. Having now started this project, I’m really looking forward to getting a board covered in painted up buildings.

If there is one thing any gamer knows, every battlefield should be littered a number of chest high walls perfect for hiding behind and funnelling enemies into killzones.. While thinking about balancing out my demo game and looking through my list of unassembled projects, I realised that I could kill two birds with one stone by building some more cover points for the insurgents. Time to assemble some Jersey Barriers.

The starting point was Spectre’s Barricades Alfa. I bought this pack ages ago when they were first released and really liked them (as you can see in my original scatter post) but never got round to painting them. Part of this was working out the best way to use them. I could leave them loose for the most flexibility but it would put them at risk of being constantly knocked around by stray arms and vehicles. The other option, slightly more limiting but likely to look better, was to put them into groups. This was the option I went for.

The first step was assembling the bases. I went for some straight-ish elements that look like emplacements without being too rigid. Like most of my demo board terrain, these were made out plasticard with filler laid over the top to form a surface. The ground was them covered in PVA and dipped into sand to add some texture. After that, they were sprayed in various colours. Black basecoat, then grey to give the concrete colour. Finally, I sprayed the ground colour used for my boards, aiming to hit mostly the ground elements and only a small dusting on the concrete (to show the sand resting in the gaps). Nuln oil on the grey was then used to darken it down and bring out the cracks sculpted into the surface. The final element? The traditional Iraqi sand drybrush.

After all that, here is the final project. The texture generated from the sand and a spray can drying issue has helped to catch the drybrush and make the dusty look I have on most of my terrain.

And here is the reverse view. As you can see, there is a really nice level of detail. I’m tempted to add a little extra to the barricades by painting on graffiti and other messages from the locals.

There we go, some new jersey barriers for my troops to use as cover/learn to vault over. I’ll be putting them into action this weekend at Hammerhead, giving the Insurgents some firing positions for their RPGs while also making the new partially constructed buildings feel more like a construction site rather than just in the middle of nowhere. I’m now looking at my other scatter terrain and thinking about the best way to use all of these small items.

(This wasn’t the post I had planned. However, I had a few issues this week which didn’t combine with Hammerhead prep very well and so I had to prioritise. I hope you enjoyed it!)

Final reminder – I’ll be at Hammerhead tomorrow running Operation Dragon’s Hoard. Look for the board with the crashed C130 in The Gamer’s Lounge!

When most people look for terrain to fill their MENA board, the first thought goes to the classic adobes. Although these mud brick buildings (and their variations) are found throughout the region, there are all sorts of other buildings suitable for the tabletop. For a while, Sarissa Precision have had a range of colonial buildings designed for North Africa in WW2 available in 20mm scale. A year or so later, and with much rejoicing, the entire collection has been released for 28mm. As someone looking for some grander buildings to represent the more urban areas of Bazistan, I just had to pick some up. I ended up going with some of the larger buildings, perfect for building some traditional streets. This is going to be an initial impressions (unpainted and missing some of the detailing greyboard) as I haven’t chosen the modifications I want to do to “Modernise” them.

As with all Sarissa Products, the building is a combination of thick MDF for the structure and greyboard for additional details. A common element of these buildings is use of large greyboard panels for the doors and window; these sit on the inside of the building to help increase the sense of depth. Additionally, greyboard window shutters are included and can be glued in either the open or shut position. The MDF is well cut and comes out the sprue with no tearing or damage. Although I always recommend a dry run when building MDF, all of these kits went together with ease.

To improve gameplay, all the buildings have removable roofs secured by MDF tags at either side. The roofs also provide some cover, although it’s only half height in the corners and the front feature. Multi-storey setups have the same combination of locating lugs allowing for quick removal and access to different levels. One comment for these buildings is that there are no interior staircases modelled in order to maximise space on the inside to place figures so moving between floors may require some abstraction.

Additionally, the range includes damaged versions of all the buildings. I haven’t picked any of them up yet but from looking at them they have done a nice job keeping them as terrain obstacles while still making them look like they had been part of an engagement.

With the basics covered, lets take a look at the specific examples.

Large Single Storey Building

The first building is a large single storey build. It’s comprised of three units, each with a different layout of windows and doors.

The rear view shows off the different arrangement of windows and doors. The end pieces also have extra detail, such as cracks in the coating of the wall or an additional window.

With the roof removed, you can see there is plenty of interior space for figures or obstacles for when you’re fighting from room to room.

Large Two Storey Building

Building two uses the same basic layout as the first building but adds an additional floor. It also changes some of the design, squaring off the windows above the doors on this compared to the first building.

The back still has plenty of windows meaning it’s got plenty of place for figures to shoot out of. Both end pieces also have windows in them for all round viewing angles.

Another addition is the two balconeys on the first floor. If you’re wanting to have figures on 25mm bases standing on them, you will need to open the doors behind them as otherwise they won’t fit.

Souk Building – Single Storey

The next two buildings are labelled up as part of the Souk, ready to form the local marketplace or bazaar for spy related shenanigans. The common feature is arched and covered area, a perfect place to add some small market stalls or to get out of the sun. For the single storey building, it’s very similar to the Large Single Storey building but with a much larger footprint.

Anyone looking at the this picture and comparing to the images on the store may have noticed something strange here. For the first time I received a miscut piece from Sarissa – the two long walls of the building were cut with the same end connectors rather than the different one needed to fit into the middle of the side walls. What this does mean is that I’ve managed to get a different layout than most with only some smaller gaps needed to fill. Sarissa provided some great customer support, another positive for them.

The addition of the covered front area adds some more room for gameplay around the buildings as well as a much larger roof element. Aside from that, the interior is similar to the one storey building shown above.

Souk Building – Two Storey

To go with the one storey building, there is also a two storey option for players needing some more vertical space. As you can see, the expanded foot print of the arched area helps to give the upper floors proper balconies with plenty of space for heavier weapon teams. One of the balconies seems to be lacking door access so expect troops diving through windows.

The back of the building is similar to the two storey building above, once again with all round line of sight through the windows.

With access to the balconies, this building could be quite a difficult one to assault and I can see lots of fighting from room to room. The balconies add some options for out flanking enemies in other parts of the upstairs.

Administration Building / Hotel

The last building is designed to be a centrepiece, the local hotel or a government building. It has a certain amount of finery not seen on the other buildings with arches and decorative elements. It also has a balcony perfect for local leaders or agitators to speak from. The roof also passes the Little Bird test so your D-Boys can deploy straight into cover.

The rear shows off another access door, as well as more as the decorative aspect of the building.

As you can see in the picture, the interior is entirely open with no interior walls. It would have been nice for some interior details on this building but I can see the point of leaving it open if you’re playing certain squad based games. With the sheer number of windows, putting full squads into the building will make it a pretty hard nut to crack.

One interesting point about the construction of this building is that it’s actually made up with more greyboard than the other buildings. This is the MDF frame which provides the top layer and most of the structure. There are then two layers of greyboard to give a greater level of depth than is seen elsewhere which will look rather special.

So what are my opinions on this range? Well it’s the usual high level of Sarissa quality combined with a style of building that I haven’t seen a huge amount of. With only a few buildings, the entire tone changes from a board mainly covered in adobes. For anyone wanting a more urban battlefield, I really recommend these.

Additionally, this style is quite common across previously colonial regions and as such could be used for anything from the Middle East to the Caribbean. These buildings could also be a great starting point for more modern buildings if you don’t mind trimming details down or cutting holes. I’m really looking forward to getting my sleeves rolled up and making them look more modern.

Sometimes, you buy some practical MDF buildings that are used every game. Things like adobes or french farmhouses or other staples whose presence is almost mandated on every game board. However, once in a while you spot something while surfing the web that cries out as something a little special. True, it may not get used quite as much as the old stand bys. But when it does come out, it’s going to draw eyes to the table. 4Ground’s Pylon is one such item – by literally towering over the table.

This is my first 4Ground kit so I wasn’t 100% on what to expect. It’s a mixture of MDF and greyboard. Both come pre-painted on the sprue, with only minimal cleanup needed (including a bead of paint on the back of the greyboard where it had pooled). Unlike some kits, this one comes with an indepth doubled sided instruction sheet, making it very easy to assembly. In total, it took me about an hour and a half (with breaks for glue to dry) which was pretty impressive. I only had two slight annoyances. The first is having to bend the greyboard around the edges, which lead to multiple cuts going slightly awry. The other are the wire coils – they are only held on by three little bits of glue. Luckily the pack comes with a few spare ones just in case accidents happen.

The fact it’s pre-painted is especially cool, meaning that for once I might actually get an MDF monstrosity on the table relatively quickly (unlike the various warehouses I have lying around). The paint job is good enough to get it on the board, but I’m sure many wargamers will want to spruce it up a little bit – I’m thinking of hitting it with a light drybrush to make it a little more sandy.

One quick note before photos – this is the first item which actually shows off how slanted the floor in my flat so any thing not looking flat is probably more due to the board board not being entirely horizontal.

Now it’s finished I can’t get over just how tall it is. It’s very different from someone saying “oh it’s 540mm tall” and actually seeing it assembled. It’s pictured here next to a few small items and it entirely dwarfs the Supreme Littleness buildings.

To help make the pylon more than just something to fill up space, it has an inspection platform part of the way up the tower. This can be access by a ladder, which can be removed from it’s holding slot to extend to the floor. It’s safe to assume these guys will be getting the max possible elevation bonus.

Finally, one last shot to show how even the base is pretty massive. Seriously, it dominates this 2′ x 2′ board. This is one item you definitely will not be buying multiples of, unless you happen to have a truly titanic board.

At the moment, I haven’t glued the two main sections of the pylon together so I can actually easily store the thing. HOWEVER, I recommend drilling some pin holes to add some extra structure to the join. Otherwise, the top part WILL fall off when knocked and it WILL break some of the black elements off. Trust me on this.

I can’t say that everyone should buy one of these things. If you play on a tiny board, it might be a little much. But, if you want to make a desert board look a bit more populated or increase the verticality of you board, I can recommend the pylon. It’s a reasonable price for a lot of MDF and the fact it’s pre-painted shouldn’t worry people too much. That said, it’s really up for you to decide if you want to spend this much on something that won’t get used that often. You can find it on the 4Ground store here.

The main article is at https://wp.me/pvEn5-2kE

 Building 1

I’m not sure if this is the final design for sprue but here is an example of the cutting. As you can see, nice and cleanly cut. The pieces separated from the sprue without any tearing.

While putting the buildings together, the rule of thumb was to assemble each floor and then attach to the framework. This is the ground floor.

First floor provides a slim side room and corridor next to the large main room.

The top floor is split partially by the stair case

As you can see here, the staircase are made out of two structural pieces which plug into the baseboard and a set of flat MDF pieces that form the steps. This set connects into a landing piece that rests on the half height wall you can see here.

The two full size end pieces for Building 1 are actually different. There is a minor difference in the depths of the notches the two sides. The instructions will show this in more detail but this was the major mistake I made during assembly.

And there is the final version all assembled!

Building 2

As you can see, building 2 is much simpler with only two floors to assemble. The staircase complicates things but assembling it using the same basic idea worked out. The downstairs piece of interior cladding has fractionally longer tabs due to the deeper baseboard so don’t get it mixed up.

At this point I assembled the framework due to the top floor resting on it. After filling in the top floor, the roof was then added.

Finally, the building in situ next to it’s big brother.

Building 3

Building 3 has a lot of pieces to take a look at but most of it is due to the staircases.

Here is another shot in process.

The stairwell is finally assembled.

Painting

Painting these buildings up was super simple. Textured spray paint, metal paint over the struts and then various sprays and drybrushing to make it look dusty.

Now, I say super simple except for this textured spray. The end result is great but the methodology was a fucking pain. I ended up buying three cans of this stuff and all of it gummed up after a couple of minutes of spraying, no matter how much it was shaken. Even cleaning the can with iso and messing with the can only gained a little more use out of it. Luckily, B&Q accepted me returning the cans I grabbed from them. I am never going to buy this brand again, so I’m on the lookout for a new concrete effect.

The main article is at https://wp.me/pvEn5-2kE

In my overview earlier this year looking at Adobe buildings, I briefly talked about Knights of Dice and their MDF buildings. Since then, I’ve picked up the rest of range and I’m now ready to talk about all the various buildings you can purchase from the Tabula Rasa desert range. In this post, I’m going to look over the basics shells, point out some features and then quickly talk about what I intend to next with them.

First up, let’s talk about the common features. All the buildings are designed as shells, only contained key structural features and with none of the detailing many other buildings would have (such as exposed brick textures or doors). The shells are made of MDF and arrive on a sprue ready to be pushed out. They are held in tightly enough so they are not accidentally pushed out during transit. This does require some pushing to get them out but I’ve yet to break a piece while extracting them. In addition, most sprues include a crowbar piece that can be used to help get the pieces ready for use. All the MDF is well cut (needing only a tiny bit of trimming on the connectors) and fit together perfectly during assembly. As always, do a dry fit before gluing together.

In all cases, the buildings have removable roofs and easy access to both floors. All the buildings also have logical access to each room via both internal or external doors, windows or via staircases. I’m not a huge fan of the staircases; assembled by default and they are way too small to fit figures on bases onto the stairs, instead acting more like a ramp. There are alternative ways to assemble them so that they are more usable but by default you won’t be placing figures on them.

In terms of scaling, the doorways are a tiny bit small for 25mm bases to fit through but perfect for 20mm. Heightwise, figures from Spectre and Empress fit them perfectly, although again I recommend 2mm deep bases rather than the 3mm slotta style bases.

The first two buildings are referred to as Compounds and are the biggest buildings in the range. Both have two floors as well as multiple internal rooms making them a battleground in their own right.

Compound 1 is a huge arrangement, spreading six rooms across two floors. Features of note include a covered exterior area on the ground floor, staircase up to an open roof and two upstairs rooms.

This building is obviously on the more stylish end of the range, perfect for a target building. The ground floor in particular is perfect for some CQB; the wall between the covered area and the rear room is asking for a breaching charge.

Compound 2 is a slightly smaller footprint but equally detailed. Again spread over two floors, this building has three rooms on the ground floor (the long one is split in half) and an upstairs room that leads onto the roof of the long room. The upstairs room is actually a frame that fits inside the outer shell, making it easy to lift out and be used in-game. 

As a note, the metal details are not part of the kit. They are from Empress as part of their builder’s yard. Expect some details on them as the project goes along.

Being a larger building, Compound Two presents some interesting tactical decisions. Multiple rooms will need clearing and the upstairs could be an interesting target location.

The bulk of the range is the small Desert Residences. These buildings have a smaller footprint than the compounds but should still be interesting to play though.

Residence One is a simple two room building but also include a flat outside area with a low wall around it.

Again, the metal details are from Empress.

Residence 2 use the same idea but in a slightly different arrangement to give some variation to your town.

Residence 3 is really cool. It uses the same footprint as Compound 2 but only on one floor. It’s a clever reuse of the same pieces but it works – the slightly larger layout makers the rooms great for scuffle.

The final building is something different. Labelled as a Storage Building, this would be great filled with ammo boxes and fuel cans. The arches are sadly too small for vehicles so it can’t be used as a garage/workshop without modification but there is still plenty of space to fill with things that might go boom.

If the compounds were not tempting enough, then this is perfect for scenario use. Fuel, ammo or a weapon cache, the multiple entrances will making this building an interesting position to take.

So what do I think of these buildings? The first thing I stress is that these things are shells – If you’re a game developer, these things are grey boxes, geometry designed to give you the mechanically feel for a place but not the actual look. They are the perfect starting point to make them feel how you want them while having much of the heavy lifting (such as rooms or multi-storey buildings) already done. You could but them on the table after a spray of paint but they would look a little plain. This lack of detail also means they are slightly cheaper than many other MDF buildings.The quality level is great and they don’t feel too small, even with based figures, that can be an issue with some other MDF set ups.

Once you put some extra bits on them and painted them up, you can get some really cool looking stuff. Spectre have used them on their demo board at Crisis and in the UK (I got to run a game on them at the Spectre Ops day back in July). In fact, Knights of Dice have released a new range using these Tabula Rasa buildings as a base but with some sci-fi elements ready to make your own den of scum and villany.

As a useful starting point, there are plenty of accessory packs as part of the Tabula Rasa range. These add useful elements like antennas and vents, as well as some walkways and ladders to improve access to the buildings.

If you’re interested in them, where is it best to pick them up? For most people, and if you want the latest stuff, you’ll want to grab them directly from Knights of Dice via their online store. In fact, the website says if you are in the area (Victoria in Australia), feel free to drop in for a visit. Being Australian based, this can lead to some long delivery times and expensive postage. Luckily, Shiny Games in the UK also stocks them (with only a slight delay between release on the KoD site and being in the UK). I have bought a fair amount of stuff from them and they are a fantastic shop. Great pricing, prompt delivery and even have a loyalty scheme ready to knock some money off your orders.

I now have these boxes, it’s time to make them look pretty. This article officially kicks Project Compound, which will take these buildings and make them look ready for battle. The idea is to make them look like an urban area somewhere in Bazistan in the early days of a conflict. Some limited damage but not completely wiped out. As well as the texturing and painting needed, I also want to add some more walls and street furniture. I’m going to update the blog with a new post once I work out which parts are going where. I still have a few Empress bits to use up (both air conditioning units and TV dishes) so I now need to work out which buildings are getting them.

I’m looking forward to getting these buildings done. This should be a great chance to make some buildings ready to sit on my boards as well as theming them to my theatre of operation – I’ll be going all out with posters and advertising.

If you’re wanting to keep an eye on this project, I recommend following the facebook page where I’ll be putting some WIP photos up.

You may have noticed some MDF buildings lurking in the background of many of my impressions pieces. I’ve had some comments on them and so this reminded me I really should get my impressions up before they get ruined by my slap-dash painting style.

I picked up these buildings after bouncing a long chain of emails between myself and Mick at REDvectors. I’d seen some images of some 20mm buildings (including a version of the target building in Blackhawk Down and the Abbottabad target building) and was blown away by the style and quality of them. I fired him an email, had come great chats about getting some buildings and then Salute happened. A few months later, Mick sent me some details on a really cool set that he was working on. After a payday I sent off the cash and then a box of MDF appeared on my desk at work.

First things first, REDvectors has some great customer support. Quick responses via email, the package was really well secured and when I realised I had a miscut piece the replacement was in the post the following day. All really impressive from a one man operation.

Right, that’s enough intro, let’s take a look at the actual buildings. The pack included 6 buildings in a range of styles. Scalewise, the doors and windows are perfectly to scale with Empress and Spectre figures. The image below shows the Empress US SF figure next to two of the buildings.

The MDF is beautifully cut with no fitting issues. Even better, the buildings came precut so there was no need to cut the pieces out of any sort of frame. As always, do a dry run first as a quick test.

The first set of buildings are the simple, 1 room classic adobe style. Both buildings have two door ways and plenty of firing positions.

As common to all the buildings in this set, the roofs are removable and with solid floors. 

The next style of building is this two storey building. Two doorways on the ground floor and another on the first floor.

Both the roofs and the interior floor (with the circle cutout) can be removed to allow access to the interior. I did find the interior floor was a little loose but I once painted it should hold together better. This is so the interior floor can be pulled out without having to be tilted to miss the roof supports. The resting points on the upper floor are a little smaller than usual to also help with that.

The last of the adobe style buildings is this small compound. It includes a small covered area, three small rooms, a well and two door pieces (currently unassembled). The well is made up of multiple rings of MDF that easily go together (don’t do what I did and use superglue unless you like to live dangerously). 

So I simultaneously love this building and can see a few issues with it. Two of the interior rooms don’t seem to have any access point for them. In 90% of cases, this won’t cause any issues. However, if a close quarter battle takes places, some abstraction might occur. That said, I didn’t notice this issue despite having the buildings for a month or so and it won’t take much to knock a hole or two in the walls. Alternatively, roof hatches and ladders allow access. On the other hand, there are plenty of cool things – the two storey tower with window should provide some interesting tactical issues.

So we now come to my favourite two buildings in the pack. These are of a style we haven’t seen much elsewhere, more suited for an urban environment without becoming something that dominates the entire board with one building. I’m really excited about the idea of seeing more of these buildings, letting you having something that looks like the Mog with ease.

The first building has a balcony (that fits figures on 26mm bases) and a rooftop shack/staircase cover. There are no visible access points between the floors so some abstraction may be needed.

The more eagle-eyed amongst you may have spotted the cutouts on the rim around the top of the building. This was not a design issue but some user error. The tabs used to rest the roof on do fit together in a specific way. So dry fit and then dry fit again!

Pulling the building to pieces reveals plenty of interior space. No interior walls gives you lots of room to set it up how you want.

The second building is a similar size but with some different feature. The rooftop is entirely flat, making it a perfect spot for some helicopter insertion (I bet a little bird will fit on it solidly). The ground floor has several entry points and there are windows everywhere for shooting out of or diving through.

In this case I managed to set up the rim of the roof correctly due to careful planning and dry runs.

In addition, the building has some interior walls on both the top and floors, giving you one large room and a small corridor around it. Again, no interior staircases might be a turnoff for some people but having more playable space makes a lot of sense.

Overall, I’m really happy with this set. It was very reasonably priced (I paid £45 including first class postage) for some very nice quality (and playable) buildings and it’s really likely I’ll be trying to get some buildings from him. I might even try to commission a few things. 

If you are interested in a set of these, the best way to get your hands on them is to get in contact with Mick at REDvectors via the Contact page (http://www.redvectors.co.uk/contact.php). Some of his stuff is also being sold via Minibits, both on their website and at several shows in the UK. You can also check out their facebook page at https://www.facebook.com/redvectorsuk/.

Alongside the release of the Razor, Spectre also released a set of vehicle stowage. Designed to let you personalise and add detail to any form of hobby project, the stowage kit comes with a pile of things to weigh down your vehicle of choice. It also hopefully points to future plans from Spectre which are exciting for anyone with a pile of Humvees or objectives that need some extra detail to them.

So for your £7.50, what do you get? According to the site description:

• 1 each of large, medium and small cooler/storage box
• 1 x long gun Pelican case.
• 2 x mid-size Pelican cases.
• 1  x laptop Pelican case.
• 2 x ammo boxes
• 4 x NATO Jerry cans
• 1 x SatCom Antenna
• 2 x Sand Boards
• 2 x Multi-Barrelled Smoke Grenade Dischargers (MBSGD)
• 1 x AT-4
• 4 x Light Antitank Weapon (LAW)
• 4 x packs

The models arrive in a small plastic bag and, apart from a quick trim of some flash, are good to go. Most things are pretty obvious, the only sticking point being the ammo boxes – for a while I couldn’t work out the second one but it’s a smaller one (more designed for grenades) as opposed to the more common design.

For highlights, I really like the AT-4 and the LAW; they are a really simple way of adding some AT firepower to any squad while still looking really cool. The MBSGDs are also really clever with the perfect shape to fit under the bull bars of an SUV. There are also some nice variations in the rucksacks, giving you everything from a daysack up to something bergen sized. Finally, there are the pelican cases – not great for your militia forces but that long gun case might have a nasty surprise in it when on the back of an SF Pickup.

So what did I use them for? Well, the first order of the day was fixing a mistake I made way back in the early days of my collection. I picked up the SAS Recce Patrol support back when the Spectre webstore started (consisting of a LMG gunner and a marksman) and then didn’t use their bergens. This was so the figures could pull double duties with the SAS Low Profile team (the packs themselves ended up in the hands of several British squaddies). Having just stripped the early paint job, now seemed a great time to give them an upgrade.

The LMG gunner took the biggest pack while the marksman  got a smaller pack put a pair of LAWs ready to knock out tanks (and to cover the joins). The packs have two parts of the strap at the top and, although they don’t fit as well as the original, they do look pretty effective. Even better, they work well with the rest of the squad making them look as heavily laden as their buddies.

The other first use is adding some detail to my 2nd Razor. I cover this in the second Razor post but it went into place very easily, requiring almost no clean up while making it look like it latched over the top of the frame.

For the future? Some of the boxes will be going on my existing weapon teams to give them somewhere to store the ammo while others will be saved to really laden down a few upcoming releases. I’m also looking at getting the plasticard out and making some fillers for the truck bed covered in gear – perfect for supply vehicles or objectives.

In the end, I think this stowage pack is one of the best on the market. There are lots of bits you would end up using and its a worthwhile purchase for anyone wanting to add a little extra to their vehicles, soldiers or terrain. When combined with the ammo boxes already out, it will be easy to give everything the right level of clutter.

Knights of Dice Cell Towers

Made of lots of little parts, these towers once built are perfect for making a building into a command post or data centre. Instructions are provided on the Knights of Dice store.

Knights of Dice Crates

Some of the cleverest design for building crates, these are made of flat sided 3D shapes with an detail layer sat on top. Perfect for filling warehouses or loading onto vehicles. Instructions can be found on their site.

Knights of Dice Pallets

Found everywhere, these are my favourite pallets. As well as the cool loader, the five pallets just look perfect and can be assembled super quickly. The instructions for both the pallets and the loader can be found on their website.

Sarissa Precision Market Stall

Easily assembled, this pack contains three stalls and six tables. The stalls are simple to build and can be easily tweaked by adding a cover to the top rail. However, the stars of the show are the tiny tables. They can be glued down but a better idea is to leave them free to move, perfect for your troops to flip when the bullets start flying.

TTCombat Site Fencing

Perfect for setting up obstacles and marking out the exterior of a facility, this site fencing is really great. The packet contains a load of sections (10 in total) and plenty of parts to link them together. The total length is quite long making the set a great deal.

TTCombat Intermodal Containers

You always need more containers. These are assembled from seven pieces and include opening doors. Each pack contains three making them a fantastic deal.

TTCombat Security Office

When building your industrial site, you’ll need somewhere for your guard to sit out of the rain and to check car entering the site. The office has one interior room and also includes two stop barriers. Simple to build and great looking on the board.

TTCombat Builders Office

Somewhere else for the guards to hide from the rain, this little office is simple but effective. I really like it as kit. In addition, you can place it inside a large warehouse to add some more detail.

As you might expect, my scatter terrain collection will continue to grow. Expect more parts coming soon!

Okay, this is a big one.

Normally when looking at buildings for wargaming, the focus is on making the outside look great. The inside becomes a second thought. However, TTCombat’s latest release is a visual treat both inside and out. It’s also ridiculously huge.

The Distribution depot is designed to be a centrepiece of a game, allowing gamers to play both inside and out, fighting through the cargo bays and across gantries. As an airsofter, it already feels like some of the urban sites I’ve played through. It’s on the more premium side of TTCombat’s releases and it’s obvious a lot of design went into it

Before I get into the impressions, you may have noticed (if you follow my Facebook page) I had an issue with the baseboard for the depot. However, within a day of telling the folks at TTCombat I had new one in my hands. Interestingly, the broken original arrived as a single piece while the replacement was in two pieces like the baseboard for the extension. I’m not sure how this happened and it’s quite possible I got something that missed QC. However, big positive on customer support.

Additionally, I haven’t got round to adding all of the cardboard detailing panels to hide the joins so excuse them missing from the photos below.

Common Parts

So the first thing I advise before building the depot is to read through all the instructions for the various bits you may have picked up. There are quite a few ways to assemble them, depending on if you want the office connected to the rest of the depot or separate, or if you want to use one or more extension kits.

As with all MDF kits – YOU NEED TO DRY FIT EVERYTHING. This is the biggest and most complex MDF kit I’ve seen (ignoring the truly gigantic galaxy building) and so there are lots of places where it can go horribly wrong. I really recommend not rushing it and taking your time as you assemble it.

Across all the buildings, the construction is primarily MDF with cardboard detailing panels. The most common use for the cardboard is covering up the various places where the MDF slots together and bridging the gaps in the roof. I think this is a very clever use of the materials but as a final step it is a little bit laborious as you slowly but surely add the straight pieces after having just assembled an entire thing. Both the MDF and Cardboard are quite securely on their sprues, require them to be cut away rather than simply “popped out”.

The Depot

The depot is the key to the entire setup – there is no reason to purchase the other two kits without first getting this one. By default the depot has two cargo bays and a double entry door at the front. There are also two other exit doors, one at the rear and one in an end wall. The internal area is about 40cm x 20cm.

As you can see while building, the basic structure is a two piece baseboard, two single part end pieces, and two long pieces made of triangular roof pieces added to wall pieces. These form the key structure with each clipping into the other and providing a good framework. From here, you start adding additional elements, fitting the sliding shutters (moveable in their rail container), adding the front loading steps before adding the shade over the bays. This shade shows off using cardboard to cover joins as well as the numbers that mark out which bay is which.

Inside, most of the floor space is left open but there is a gantry level. It sits quite high off the floor level, easily letting you fill the ground floor with containers and more. The gantry is assembled from MDF base pieces with a layer of cardboard on top. Both pieces are expertly cut out, making it easy to fit them together and allow additional elements such as ladders to be put into place. Around the gantry are is a railing, that holds the gantry’s surface up.  The gantry also include another ladder heading to the roof.

As you would expect, the roof is removable to let you access the interior. The roof has some nice details such as fluorescent lights and open panels. More importantly for something you’ll be moving on and off, they feel really solid. I don’t feel concerned about putting them down while playing.

For all the great parts of this kit, there are one or two little issues. I think the instructions are useful but there are lots of places where it took a while to work out exactly what is going on. There are also some strange issues with parts. I seemed to be missing parts of the stairs; instead having shorter stair props, I instead had duplicates of the stair with banister. This was easily fixed, requiring a quick snip to prevent them covering up the front entrances but was a little unexpected. In addition, there is a set of four holes in the backboard which look like somewhere you would normally attach the banisters to but are not used. Finally, as with other TTCombat kits there were one or two places I had to trim a part or two, most notably on the banisters where they connect to the front wall. Another reason to test with dry fits.

But wait there is more! The depot also comes with some additional bits to help fill the large interior.

I really like the fork lift included in the set. It’s just about the right height for my 28mm figures and is packed full of character. There is a slight downside in that they only really work well carrying the TTCombat pallets – anything heavier on the forklift just tips over. Even so, just look at it!

The depot also includes three shelving sets. These are really cool and help to fill the interior without blocking all the lines of sight. The gap between the shelving is perfect sized for the various crates you may buy, including a large pack offered by TTCombat.

I’m less excited about pallets. After having assembled the entirely MDF Knights of Dice ones, these are just disappointing. Rather than made out of just wood, they are instead combinations of MDF “legs” and a cardboard top. Having made a few of them, I have little faith in them maintaining their structure as they seem to flex a lot..

More exciting is the ramp that lets you wheel things up to the level of the front doors. MDF side pieces hold up a cardboard surface. It looks very cool. The only downside? It would have been nice to have a second one to allow for one to be placed on either side so vehicles could drive in and out of the depot or have them lined up at both bays.

The Extension Kit

Okay so the depot is big. But what if you need it to be EVEN bigger?

Fundamentally, the extension kit is another set of front and back walls with a slightly different layout and a method of attaching to the original building. The kit does require you to use the end wall from the Depot meaning you can’t easily switch between a single depot building and one that is extended. The new layout moves the gantry into going only along the back wall and increases the number of bays from two to three. Everything else, from initial frame to assembling the roof is made using the same techniques as the main building.

As with the depot, the extension kit also includes three shelving units, a ramp and a pile of pallets. These are the same as the main depot so check above for my impressions.

Finally, after looking over the plans (and realising how far the detailing numbers go), it looks like you could easily extend the depot to have even more bays simply by adding another extension kit in between the original depot and the kit you have assembled with the end wall. It’s a cool idea, but seeing as the depot + extension is almost 3ft in length, you will need a giant board.

The Office

Going from the huge buildings in the rest of the series, the office is a bit of a step down. Designed to give you somewhere for the security guards to hang out, the office is two storeys high but only has a ground floor. The building also has a normal door and a vertical moving slide door. The roof is also removable. On the other hand, the office does not include any interior furniture.

It’s a cool little building and I think any depot park without would be a bit lacking. It’s also a nice change of pace to build after the complexity of the rest of the depot.

If you assemble it without the back wall, and don’t install the light above the entrance to the depot, you can clip the office to the main depot. This lets you easily create a reception area (perfect if you’re trying to make a Royal Mail depot).

Final Thoughts

Overall, I’m very impressed with the range. Once fully assembled, it a true centrepiece, drawing the eye to it. With the roof on, it towers over the rest of the board. Remove the roof and you suddenly have a large interior space that can easily be filled with scatter terrain to form a complete battlezone.

It also seems a decent price. For all three kits, you’re looking at around £80. If you compare it to Sarissa’s factory (around £50), that £30 difference gets you a huge increase in playable area and a pile of scatter terrain. Of course, you could just combine them to build up an industrial park, all ready for your troops to fight through.

For as much as I like it, it would be cool to be able to have a bit more depth to it, letting you have a much larger warehouse to fight through. You could try to custom build it by sawing a hole through the back walls and adding an additional depot but it would require a fair amount of bodging to get it fully working.

If you’re wanting something to make you board stand out or have a certain desire to fight through parked HGVs and shelves full of crates, then this kit is for you. Of course, it does now mean I’m terrified to see what TTCombat is going to bring to Salute next year.

I hope you all enjoyed that as much as I enjoyed building it. Next weekend, keep your eyes open for a battle report showing some dodgy business going down at the depot…

STOP THE PRESS: Just as this goes to be posted, TTCombat have released a range of new sets to complement the depot, such as additional machinery and shelving units. Expect impressions in the future!

(Hey everyone, as a special treat thanks to me hitting over 2500 views this month, I thought I would bring a post back from the future and put it out on this Bank Holiday Monday)

There is something about a toy lorry that takes you back to being a kid. Of course, as a wargamer, you then want to skirmish around them and use them as terrain. You could go and get a diecast truck from the toy shop but there is an alternative if you want to get them even cheaper. TTCombat does several vehicles (including armoured trucks and a taco van) and all for a good price. I picked up two of these HGVs ready for the tabletop and was very excited to get started on them.

Construction

The HGV comes on two sheets of laser cut MDF, as well as an instruction sheet and a front page showing a completed model. Removing the pieces is easy – the laser cutting in the MDF is spot on, leaving only two corner bits still attached. A quick twist and the pieces separate needing only a minor bit of pruning to get them in shape.

The main body of the truck is a long thin baseboard and the shorter squatter upper level that forms the bottom of the cargo bay. From here, the upper panels are attached to form the box structure. The only niggle with this is that the upper part of the wheels protrude into the cargo section, leaving them exposed if you choose to open the back doors. I’d recommend either leaving the doors sealed closed or be willing to break the MDF out and tweak the inside.

Speaking of the wheels, each wheel unit is made up of an axle with two connecting tabs (for the body) and two rods, two plain wheel plates that attach to the rods and two detailed wheel plates that fit onto of the plain ones. I am not 100% sure about the assembly on the wheel – should the inner and outer be lined up or alternating? There seems to be a mixture on the site between the vehicles so I would guess it’s down to personal preference (I went with matching).

Once the rear box is done, the front section is then added. I did a quick trim down to the bottom tab on the front panel as it didn’t seem to fit 100% but in the end it was all alright. The lid for the cab is removable so you could leave it unglued to allow placement of crew figures. There is a tiny gap where the upper and lower windscreen meet but it’s barely visible.

Modification

So as you can see in at this point the crew compartment is visible and accessible. However, as the rest of the vehicles in my collection have painted over windows and the cab is a massive space lacking in detail, I decided to fill in the gaps using off cuts from my spare pile of MDF. This was super easy, thanks to plenty of space on the inside. Just make sure you pop the slots out for the mirrors before you glue the interior panels in place.

Final Result

Add on a few detail pieces (headlights, mirrors and the grill) and the kit is done. Now for the pictures you all wanted!

The rear shows the detailing for the lights. This is actually slightly cut out of the MDF, so it should still be visible once the basecoat is applied. There is also details on the rear door and the number plate.

At the front you can see the details on the grill, more cut in details on the lights and the wipers in place. Comparison time. Here it is next to the Foxhound (now undercoated) and standard reference figure from Empress. It’s a big old vehicle, slightly oversized for 28mm so it fits with 35mm games but should still be fine as a terrain piece.

The container is slightly smaller than the truck’s cargo bay. You could use the truck as a starting point for a container carrier but you would need to build a bed that sits over the top of the wheels.

Final Thoughts

The truck kit costs £5.95 from TTCombat and I think it’s worth every penny. There are a few places where some tweaks had to be made but the end result is a really solid HGV that is great to play around. It’s a good starting point if you’re wanting to make some more decorative like an Afghan Jingle truck requiring less of the prep work that a diecast replica would need. Overall, I’m very happy with my purchase.

Now, if only I had some sort of depot for them to park up in and load cargo from…

Strictly speaking, terrain isn’t technically needed for a wargame – a few pieces of cardboard with labels on can play the role of buildings and walls. However, terrain makes games much more interesting, giving you something to actually fight over rather. While big buildings and rolling hills help shape the gameplay and draw the eye, smaller items and scatter terrain brings the game to life. Its makes urban streets feel like somewhere people live, adds detail to otherwise empty plains and provide vital cover in skirmish games.

There are two sets of impressions coming for scatter and smaller terrain items. This first article will cover plastic and resin items while the second will look at everything made from MDF.

Spectre Trash Piles

This set from Spectre was the first bits of terrain I picked up and they are pretty fantastic. The pack includes three cardboard boxes, three small rubbish bags and a large bag pile. All the terrain pieces have flat bottoms while the large pile also has flat back, perfect for fitting next to a building in a crowded alley. Both parts are great for adding some decoration to a street scene or terrifying your opponents by using them as possible IED sites.

Spectre Oil Drums

All games that involve shooting need barrels (especially red ones) and these are great. Each pack includes 10 barrels. They have a nice level of detail and paint up nicely. The only major issues is you can see some casting lines and a few of the barrels have some missing rims after some use.

Spectre Barricades – Alfa

Designed by The Lazy Forger, these barricades are amazing and an easy way to meet the chest high wall requirements of any mission. The pack includes six full size barricades and one partial barricade. Each one is unique and full of detail, really giving a war-torn feel to a board. The barricades are flat edged so really fit best forming straight lines.

Spectre Barricades – Bravo

Another Lazy Forger designed product, these vertical barricades provide full height cover. The pack includes six walls and once each is unique. They are also filled with evocative detail, such as the exposed re-bar inside the concrete and the masses of bullet holes. The walls have a concave edge on one side and a convex edge on the other, letting them fit together and hiding most of the join.

To add, both of these products make me really excited for what The Lazy Forger is doing next – Brick Walls! These are instantly useful and will make both building modification and board setup even easier.

Spectre Ammo Boxes

Not yet on general release, these hard cases were available at Salute 2017 and will presumably coming soon. There are a few casting lines that need trimming down but the level of detail on them is ridiculous for such a small item. These will look great when building a military outpost or wanting some objectives for teams to fight over.

TTCombat Portable Toilet Set

Most of the time your figures are answering the call of duty but sometimes they might need to answer the call of nature. These resin portaloos (coming in a pack of four) are simple and do the job, making temporary military installations or building sites slightly more realistic and also adding some full height cover. They are one piece of resin and feel really solid. Luckily they also don’t include the smell.

TTCombat Bank Accessories

Money, it makes the world go round. This pack is designed to add-on to an MDF building, letting you fill it with loot. The vault door and safes are really cool but the gold bars in various combinations are spot on for objective markers. If you’re wanting something more mobile the cash sacks are just the right size for using as markers, letting you know which of your troops have grabbed the swag.

TTCombat Bank Accessories 2

The second part of bank accessories are more security focused. It includes two burglar alarms, two piece security cameras (allowing for some careful placing and angling) and pieces required for a security console (such as a keyboard and a screen). Unlike the Bank Accessories 1, this one is very much focused on upgrading other pieces of terrain. However, it is very effective at this job and gives you a lot of bang for your buck.

The resin stuff is great for objects on the smaller side, but once you start using cheap laser cut MDF and scatter terrain can start doing some really cool stuff for the slightly bigger things. Come back in two weeks for part two where I’ll cover MDF constructs including shipping containers, pallets and more!

Sarissa Precision are pretty high on my list of favourite terrain companies thanks to their wonderfully detailed buildings. Among my favourites in the range are two buildings from their Industrial range, the factory and the office. I first saw these thanks to Spectre’s playtest report and was immediately interested in them.

Like all Sarissa buildings, both arrive on A4 sheets of laser cut mdf. In addition, they also have some cardboard detailing panels that sit inside the MDF. Unusually for an MDF building, the kit actually includes instructions which is massively appreciated to make sure no mistakes happen during assembly. For both kits, the MDF parts were cleanly cut and came away from the sprue really easily. The cardboard is a useful addition and easy to place but I’m less happy with the doors, especially the larger warehouse ones. The hinge is quite thin and just asking to eventually fall away if constantly moved. I will probably end up glueing or taping them.

Both kits include gantry items which can be combined together. As you can see above, this lets you bridge between the two buildings or just make a bridge. The gantries are simple to construct and look very effective on the tabletop.

In terms of scale, the Sarissa kits fit perfectly with the 28mm figures I have. The gantries are perfectly sized for 26mm bases (and would probably fit the 30mm bases used by Batman and other games) and the warehouse door easily fit most of the vehicles I have.

Factory – Office/Warehouse

(Please note, the metal air conditioning is not part of the kit but was added to make removing the roof easier)

This building is two stories and designed to be the perfect side building alongside larger factory units. The ground floor is slightly taller than usual and  has two large warehouse doors and a side entrance. Above it, the top floor has a side door for use with a gantry . The top floor also has a slot through the floor but I’m not sure it’s suitable for a staircase – it’s also too short for the height of the building and would block entryways in either alignment. However, a ladder or pulley system could be fitted depending on the building’s purpose.

The roof and top floor are removable with the roof resting on the top of the cardboard detail layers. Inside the building, the top floor rests in two slots in the cardboard and is surprisingly sturdy if a little fiddly to place correctly.

On both floors, the detail cardboard has lots of windows meaning the building has plenty of fire points. The outside also has a chimney or water pipe. unfortunately I managed to mess up construction of this and so on mine it’s slightly misshapen.

Overall, I really like this building. It works both with other industrial buildings or settled amongst more civilian dwellings for a little variation. The two floors also make it interesting to play through. As the description on the website, it could be warehouse with a storage area upstairs or an office depending on how you want to decorate the interior. This is a building I’d be interested in picking up a second.

Factory – Large

If you’re looking for a centrepiece to your wargaming board, the Sarissa factory is perfect. About 1ft square and two stories high, the factory just toes the line between “terrain feature” and “play area”. The interior is dominated by the open warehouse floor but there is also a smaller room under chimney (perfect for sneaking in through) and a second floor balcony so you can take the high ground and get a good view over anything inside. The balcony can be accessed by both a gantry on the outside and also from a ladder from within. The balcony is not removable.

The two end pieces are mirrored and both include two warehouse doors and a standard door.

A cool feature of the factory is the interior crane. This is composed of three parts – a frame, central gantry and the crane unit itself. I do not recommend gluing the frame in place if you intend to actually play through the interior as it sticks out and can prevent gamer hands from being able to place figures. Similarly, the gantry and unit can also be left unglued thanks to how well they grip the tracks which means the crane can be repositioned depending on the scenario. I’m a big fan of it. Especially if you get someone up on top of the crane, just asking to fall to the ground once he is taken out.

Finally, here are all the bits that make up the warehouse. The roof is easy to take on and off (resting on the struts you can see in the interior photo) and also feels very solid once constructed. The gaps in the roof could be filled with plastic for glazing if you want to add that extra detail.

Conclusion

So, overall how do I like the buildings? They are fantastic kits to build, easy to knock up over an evening. Once constructed they just look great, giving even the barest of boards a cool edge. I have my reservations about the cardboard doors but having played a few games using them, they are very gameable items of terrain letting you sweep and clear without having to carefully balance figures on strange angles.

There is however one thing to think about and that is the price. The factory is £50 and the office is £20. You get a lot of stuff for that cost but it is definitely on the higher end of MDF pricing for this size.

Overall though, a big thumbs up from me! Now I just need to go paint them…