So far, nearly all the vehicles I’ve covered on the site have been either of Western origins or some form of technical. However, my regular OPFOR have been needing some vehicles to back them up. Where better to start than the GAZ Tigr, available in 28mm scale from Empress.
The Tigr is a infantry mobility vehicle developed for the Russian military and currently in use with several armed forces around the world. The model looks like its one of the armoured variants, capable of carrying a full squad of infantry through small arms fire and across rough terrain. This version is also armed with both a PKP medium machine gun and a AGS-17 grenade launcher, making it a pretty useful base of fire to cover your advancing troops.
Like nearly all the Empress vehicle kits, the Tigr is a combined resin and metal kit. The body, front bumper, turret ring and tyres are all resin while the finer details (like hatches, weapons and lights) are the usual white metal. There was a small amount of cleanup to do on the resin parts, but not more than would be expected for a kit of this type
Construction is simple – the bumper section slides easily into the slot at the front of the vehicle. Once done, the wheels can then be added; these fit both on the four struts and on the rear spare wheel mount. From here it’s simply a case of adding the various metal detail elements. The turret setup with the hatches is one place to carefully look at so I recommend dry fitting everything. If you want to go for a command version rather than a infantry carrier, the kit comes with a whole array of antennas to make it stand out.
As always, I hate painting vehicles. However, the Tigr was relatively quick to paint thanks to the level of detail on the body. After a desert tan spray, I followed up by quickly painting the tyres, glass and the tools. After that, it was several drybrushes and then a relatively thin wash to finish it off.
There are some really nice details on the vehicle (such as the tools on the side) which are impressive and really help to make the vehicle look detailed. Apart from the usual mess that I make of the wash, I’m really happy with the final look of this vehicle.
Picture here for scale are a few possible groups that will be using the Tigr in game. From front to back:
To carry on the comparison here are a few other vehicles alongside it:
Evil Bear Panther – based on the Iveco LMV, this is another infantry mobility vehicle. The similar size shows off some of the shared capapvilties, but the Panther is a much shorter vehicle as it’s for command and control rather than troop transport.
Empress Humvee – the main thing look at modern vehicle is showing me is that the Humvee is actually not the giant monster you always think it is compared to vehicles in the UK. Everything about it is
The final comparison is against some more civilian vehicles, both from Spectre. The pickup looks a similar size but much less bulky. The standard car though really shows the difference in size between civilian car and armoured troop carrier.
So my personal thoughts? I love this vehicle. It was beautifully simple to assemble, quick to paint and looks great on the tabletop. It’s also something different from the usual Humvees and BMPs, giving any games using it a nice feel. As well as military use, I think you could assemble it as the local SWAT van of a foreign country if you miss off the heavier weaponry. I’m planning to pick up another couple of these vehicle to carry the entirety of the platoon I currently own. At the very least, I’ll be setting up another one as the command vehicle. Expect to see this on the table dropping off squads of Bazistan Army troops wherever they can be the biggest pain for the other team.
Time for a little extra post to push you on through the week! As I’m looking at finishing off a few modern US military vehicles, I decided to pick up a pack of Empress US Stowage 1 to make them look a bit more used and in action rather than factory fresh.
Inside the bag you will find:
Two tow cables
Two wooden ammo crates
Two fuel cans in mounting bracket
One large tarp, stowed
Two small tarps, stowed (although one of mine seems to have gone walk about on my desk)
Three assault packs
Three small packs with bedroll
Three large packs with bedroll
Thanks to the style of the items, this pack could be used on almost any modern US armed forces vehicle. It also works for a large time period from the late 1980’s up until the modern-day. There is a really nice level of detail on them and should look great added to any vehicle. The packs are especially good, easily added to many of the Empress figures (such as the US Infantry) if you want to change to the look of them. The tow cables are also pretty handy. That said, some of these items are already moulded on some of the vehicles so I recommend having the vehicle in front of you before planning what you intend to add to it.
The real question is, what do I have planned for them? Well, they will be going on the stowage racks on both of my Strykers – this will mainly be the rucksacks, stowed on the outside for the crew inside. The M-ATV is also going to be packed full of stowage thanks to it’s large cargo bay. In the future, I may pickup another stowage pack for other US military vehicles such as a second M-ATV, M113 or some Humvees. Finally, I’m to use some of the packs to add some extra variety to my US Army infantry platoon.
So this is the first of a new format of post. Every other Wednesday I’m going to start doing smaller posts, around 500 words. This will mainly be hobby focused (showing off WIPs) and smaller impression pieces (such as for single figures from existing ranges). The reason for this? I’m going to run out of weeks in the year for everything I want to write about!
Sadly, due to my desire to get the vehicles in a state where I can hot swap the various weapon systems and cargo, I don’t yet have them painted. However I can cover the initial impressions on every part of this release, detailing any issues I may have found during the initial build process and looking at what I like and don’t like. You’ll just have to wait to see the final product.
The vehicles that form the base for the SF Technicals range are the exact same ones released earlier in the year. Alpha provides a larger truck bed while Bravo is a more modern style but has a smaller cargo capacity. When building the kits for the SF vehicles, I assembled the two part chassis and then added the rack behind each cab. The remaining parts were left off to make assembling the upgrades much easier.
A few things have changed with the vehicles since the original release, presumably to ease production and save on material. Technical Bravo is comprised of much less material, with the cab now mostly empty space. The other thing I noticed was that some of the resin was slightly misaligned. This was quickly solved by a quick bath in hot water and some gentle bending.
The Upgrade Packs
The first part to look at when building your new technicals are the upgrade packs. These additions build off the pieces in the main kits and help to make them look more suited for off-road activities or military action.
Alpha is perhaps the simplest of the upgrade packs. It’s a pack of wheels, sporting improved tyres. These are a good way of showing off upgrades (such as run flats) or extending the stowage in a vehicle by covering it in spares. These wheels replace the ones from the vehicle packs and come with enough to fully outfit one vehicle and have two left over to mount as stowage or for a gunner to stand on. They are a little bigger than the default wheels so the finished vehicle will be slightly taller than normal.
Bravo is designed to make your vehicles really standout from the civilian pickups while also letting you really load it up with stowage. The pack is actually two sets of upgrades in one. The first is a long-range fuel tank. This is assembled around the rear door to the cargo bed. After placing the tank, a cage comprising of three parts is placed around it. The main thing when building it is to make sure the curved edges of the two side pieces clip onto the round sections of the back of the cage (it will make more sense when you are building them). Then simply glue the construction on the back of the cargo bed. If you don’t want the giant tank of flammable liquid behind your operators, the cage could be assembled to hold other stowage such as jerry cans or hard containers.
The other part of the upgrade are the racks that mount on the side of the cargo bed. These create the mounting points for all sorts of gear, from spare tires to sand guards. As well as hosting these bits of gear, the rails could also be used to support plasticard armoured panels if you feel the need to up the protection on your vehicle. I’d recommend putting the vertical part of the mounting area on the inside of the cargo bed (as you can see below) as it looks a little better
The rails mount on both types of chassis but are really designed for the Alpha technical. However, it does also work on the Bravo vehicle as you can see below. In this case, the side rails ended up connecting to the top of the cage around the fuel tank. This style does look similar to some troop carrying pickups you might see in places such as Mexico.
Charlie & Delta
These two packs perform the same role – adding bullbars and a snorkel to both types of the base chassis. These upgrades really add to the off-road style on the vehicles, turning them from a street truck to something you would expect to see bounding through the desert.
Charlie is for the Alpha technical. The pack includes a new bumper that features the bullbars, a snorkel and a roof top storage rack. The bumper fits on really well and I think looks awesome. The snorkel has a notch in the side to help with alignment when placing it, something that is appreciated during construction. However, my favourite feature is the roof rack. It has a slight ramp on the mounting block so it sits flat on the sloped roof and it looks rad. Combined with the stowage pack, you can fill it with all sorts of hard cases, anti-tank weapons and gear (all the goodies a team of operators might need) while leaving most of the cargo bed free for weapon mountings.
Delta is for the Bravo vehicle and contains a replacement lower front and the snorkel. It would have been cool if it came with a roof mounted storage rack to match the other pack of this type but it’s not a deal breaker. Again, the snorkel has a nice notch to help with placement and the resin front end only needed very minor cleanup.
Of course, a major part of the latest release is giving you some SF suitable weapons for your new rides to roll around with. You could choose to mount the standard weapons (perhaps if your team is less well equipped) but honestly, there is a minigun option literally right there.
In every release from any wargames manufacturer there is a slight disappointment and I think this time, the crew selection is the slight let down. When the first technicals came out there was a nice selection of generic crew standing next to the various weapons. For the HMG alone there were two options seemingly designed for it (one shooting and one leaning on the weapon spotting). For the SF release there is only one option – Crew Hotel, an operator in combat gear in the aiming pose. It’s a good basic option but having a second choice (perhaps a character pointing out a potential target or gesturing at some civilian trying to overtake) would be a useful. Even a simple head swap would have been nice. At the same time though, this is probably the most commonly used pose so in the end for many people it won’t matter.
One thing to note is that you will need to carefully bend the arms to line them up to the trigger locations. It requires just a little more force than you would think it would need but the metal Spectre uses is very good at being slightly manhandled.
The new guns listed below share a common feature – the mount. Unlike the pole on the original M2, the new guns use a much more sturdy looking mount. It comes in two heights; the tall one clears the top of cab and allows for a forward fire arc while the other is better for rear or side firing guns. The top of each pole is split in half and matches up to the bottom of each of the weapon assemblies. This requires some patient holding while waiting the glue to dry but seems to work quite well.
No matter what height you choose, both mounts will require that a rear gunner stands on something in order to reach the spade grips. Having seen one of the Spectre models at Cardiff, it seems that a spare tyre is a good option.
Yep, you can’t release a technical without a 50cal. This one however is rather special. Wrapping the barrel is rail system onto which two attachments have been mounted. On top of the gun is an Eotech style holographic sight (or red dot in Spectre Operations) while underneath is the giant Hellfire torch capable of illuminating targets much further than other light systems. Combined together, these provide a useful setup to pair with the HMG’s lethality and range on the tabletop, letting you engage targets accurately no matter what time of day it is.
Without a doubt this was the simplest weapon to assemble out of the group. The gun is one piece so all it required was gluing it to the mount and it was good to go.
The only thing better than a 40mm grenade launcher is an automatic one complete with rangefinder. An upgrade over the old MK19, the MK47 AGL is the hottest new thing in automatic grenade launchers. With basic stats its great for suppressing large groups of unarmored enemies but the addition of an aiming system (run as either a scope, red dot, thermal sight or some combination of them) really helps to make it a precision area weapon. If you are feeling especially high-tech, the MK47 is capable of programming MK285 rounds to airburst over a target. So if you want to make an opponent cry, mention you want to use those rounds and start dropping grenades every turn that ignore cover saves thanks to the airburst rules.
The gun is made up of three parts – the barrel and main sight piece, the side mounted sight (including rails for other sights) and the stand/ammo box assembly. Glueing these three together required a few tweaks to get them lined up. By default, the launcher is slightly tilted upwards ready to lob rounds at the enemy downrange.
Why have only one medium machine gun when you can bolt two together, stick a sight on one and then add a chute for spent shell casings? Like the SAS jeeps from WW2, the simplest way to increase firepower on a mount is just to double what you have. The MMG is a good gun to begin with thanks to Sustained Fire and a 3+ lethality but turning it into a dual weapon means double the shots. Add to that a scope/red dot and you’ve got a great weapon for engaging infantry.
Building the gun was the most fiddly of them all, consisting of five parts. The two ammo boxes clip on the outer edges while the guns themselves fit into the slots in the lower mount. This mount then attaches to the tower using the usual method. As always, do a dry fitting run before getting the super glue out.
Now if only there was another way to get a ton of shots on targets…
Okay I’ll admit, this is something I’ve wanted since the kickstarter. Miniguns in all their forms are super cool and having one on the wargames table is just too tempting. Assembly is relatively simple despite the multiple parts. The gun sits in an arm that attaches to the column. As well as this, there is an optional red dot to mount on the rail on the top of the gun itself and two parts to form the ammo supply. The belt is the usual strip of metal that can be freely trimmed and twisted to line up with the large ammo box.
As an aside, one of my favourite things about the separate weapons that Spectre produces is the fact I can use them elsewhere. I have two Empress Humvee where I have replaced the gun mount with a magnet. Combined with Spectre’s stock of guns, this means I can swap out the standard M2 HMG for a DsHK (for when the Bazistan Army gets to use them) or, as you can see, for a Minigun. This versatility means you don’t have to buy 101 different vehicles for all the combination of weapons you might want, instead only needing as you might want to be on the tabletop. One thing with the Minigun, I had to trim some areas so it would fit properly on the magnet and trying to fit the ammo box in the turret is going to be hard.
In game, the minigun is a nightmare to go up against, no matter what the ruleset. Spectre Operations gives it 6 shots a turn that let you roll through a squad and easily put on the suppression. 3+ lethality and a decent range interval finish off a good package, espeically if you add a red dot.
This release didn’t include any new stowage options (other than the new tires). However, last month we got Stowage Alfa which is packed full of stuff to cover your vehicle in. You could use the Razor stowage packs but they are not really designed for this style of vehicle.
I ended my post on the initial Spectre Technical release by saying “The Spectre technicals are a great start to a new range. Apart from the minor issues, all the models are beautiful to behold and will be fantastic additions to anyone’s collection.”. It’s safe to say, the same idea carries on here.
With the second major release there are now a collection of parts that let you take that initial release and direct it to be more suitable for a different use. Although designed for Special Forces teams, the upgrades mean the vehicles can now be used for other groups (such as well-trained OPFOR, contractors or cartel members wanting a cool off-road vehicle) by simply varying many upgrades and how much stowage you add. There are a few tweaks I would make (more crew options, stowage racks for Technical Bravo) but these can be easily be added in future releases. For now though, all the new bits open up a world of exciting possibilities. I can’t wait to see the sheer variety of vehicles people come up with.
So now I’ve done the initial thoughts, it’s time for me to do the fun stuff and start finishing them. There will be a whole post on the process of getting the group of vehicles finished in the next few weeks. The main delay is setting up the series of plasticard bases that will let me swap guns and cargo sections between vehicle while hopefully looking better than the first version used for the militia. In addition, the militia equipment is being rebased and repainted after they got banged up during the trip to Cardiff. So keep your eye on the blog for more stuff on Spectre Miniatures releases and all things dedicated to ultramodern wargaming.
It’s taken a while but the Razor is now available from the Spectre website! Although it’s currently out of stock due to everyone buying them, they are now actually on the site. In addition, there are now crew and stowage available so you can make your vehicle look even more operator. We’re going to take a look through these new arrivals, and then have a quick update on my own Razors.
Building the Razor that arrived in the post was almost exactly the same as in my original post. I had to do a little clean up on the parts (you can still see the flash in the picture above) and I had to fix a cracked mud guard. Apart from that, the various pieces assembled easily. It was helped by the instructions now being online which mostly matched up to my procedures
There were a few things I tweaked but these were mainly due to the other releases that came out the same day. Primarily, I left off the seats, roll cage, steering wheel and GPMG. The other thing I left off is what sits in front of the passenger to make it match up with my pre-built one. I think it’s a handle (something to hold onto as the driver guns it) but I think the original part went missing somewhere between the Salute showfloor and my flat.
The first new addition is the Razor Stowage pack. The pack contains three items (two jerry cans in storage racks and a spare tire on frame). Both objects come with mounting brackets designed for specific places; the spare tire clips onto the top of the roll cage while the storage racks slot into the slits on either side of the cargo frame. However, you can easily trim them down if you want to place them somewhere else, such as cutting the supports off the racks so they can be placed on the rear gate of the cargo bed.
As for the looks, it really makes the Razor look a lot more suited for the off-road life and less civilian. The design features of the elements (in order to help place the items) is really smart and helps a lot with placement without giving a hard and fast “ITEMS MUST BE PLACED IN THIS LOCATION”.
The other major addition is the crew. Unlike the technicals, the Razor is open to the elements and so really requires crew figures for use on the tabletop (it’s a bit strange rolling an empty buggy around the world). The two crew packs give you four figures in total; Alfa with the front crew (Driver and Gunner) and Bravo with the two guys sat in the cargo bed. Splitting the crew into two packs let you easily pick the crew you want, especially if you want to fill the rear cargo section with some form of cargo without having spare figures left over. The figures have the same shapes on the bottom of them that match up with the seats so that the crew fit in the correct place. The crew designs fit with the rest of the Spectre range, looking closest to the Task Force Operators or Rangers collections.
Now, the crew do come moulded into the seats and this was a minor annoyance as someone who built up their vehicle before they were available. However, after having seen the final product, there is no way I’d have wanted the figures separately as you would not have been able to get the same level of posing as these guys have. It’s cool how the crew members actually feel part of the vehicle (such as the driver with one foot on the outside of the buggy) rather than just resting on top of it.
Fitting the steering is a pain in the neck and the getting the GPMG into location required some careful balancing of three separate pieces. But overall, these guys are a must buy if you have a Razor that you intend to have rolling round the battlefield
So that’s cool for everyone else but what am I doing with mine?
So first thing – I made my first Razor before the crew were available and so it’s fitted with the seats. This means that without serious surgery (not something I want to try on resin) I can’t mount crew on it. But this gave me a plan. Razor 1 would become the dismounted version, ready for use as an objective or when the team dismounts. Razor 2, the brand new one, would get the crew figures. I would then make sure both had the same arrangement of gear and spare tires and paint them up in the same way.
This did throw up a minor issue. On Razor 1, the GPMG is stowed against the side of the cargo deck (primarily to make sure there isn’t a fragile piece of metal sticking out at a right angle). On Razor 2,this GPMG is now in an active position as the gunner starts hammering away. This leaves a giant empty space on the side of the vehicle where I can’t mount a rack as it wouldn’t match. However, the other release of the week came to the rescue. I stuck a bag over the space on Razor 2 – the thinking is that the team has grabbed their assault pack after dismounting (hence why it’s missing on Razor 1). It’s a cool little thing that no one apart from me will notice.
The next step was painting. Both the vehicles got a black undercoat and then followed by a desert tan spray. I then painted the details. I also painted up the crew using the new multicam pattern separately from the vehicles so the shadows on them would still be black. I then got the joy of assembling them onto a mostly finished buggy. This is a painting method I hate but in this case I think it was the best option.
As you can see in the photo above, I didn’t quite finish them before going to press. However, I should have them done for Monday’s Wargaming Week.
Conclusion Part 2
The Razor is an exciting kit to build and looks great when finished. However, I think the additional packs really make it. The stowage gives them a cooler feel while the crew is basically vital. Total cost for a fully equipped Razor (buggy + both crew packs + razor specific stowage) is around £33 which is quite expensive for such a small vehicle. However, it is packed full of detail and makes a nice centerpiece/tactical option for an elite force of operators.
Looking ahead, I hope we get more stowage and alternative crew poses. The rules page has some interesting points on it (such as a mount for heavy weapons on the roll cage which seems nuts) and even mentions some more variations on the Razor design. As I said in the first impressions piece, the Razor shows off a super exciting and interesting direction of releases that Spectre can go in.
Alongside the release of the Razor, Spectre also released a set of vehicle stowage. Designed to let you personalise and add detail to any form of hobby project, the stowage kit comes with a pile of things to weigh down your vehicle of choice. It also hopefully points to future plans from Spectre which are exciting for anyone with a pile of Humvees or objectives that need some extra detail to them.
So for your £7.50, what do you get? According to the site description:
1 each of large, medium and small cooler/storage box
1 x long gun Pelican case.
2 x mid-size Pelican cases.
1 x laptop Pelican case.
2 x ammo boxes
4 x NATO Jerry cans
1 x SatCom Antenna
2 x Sand Boards
2 x Multi-Barrelled Smoke Grenade Dischargers (MBSGD)
1 x AT-4
4 x Light Antitank Weapon (LAW)
4 x packs
The models arrive in a small plastic bag and, apart from a quick trim of some flash, are good to go. Most things are pretty obvious, the only sticking point being the ammo boxes – for a while I couldn’t work out the second one but it’s a smaller one (more designed for grenades) as opposed to the more common design.
For highlights, I really like the AT-4 and the LAW; they are a really simple way of adding some AT firepower to any squad while still looking really cool. The MBSGDs are also really clever with the perfect shape to fit under the bull bars of an SUV. There are also some nice variations in the rucksacks, giving you everything from a daysack up to something bergen sized. Finally, there are the pelican cases – not great for your militia forces but that long gun case might have a nasty surprise in it when on the back of an SF Pickup.
So what did I use them for? Well, the first order of the day was fixing a mistake I made way back in the early days of my collection. I picked up the SAS Recce Patrol support back when the Spectre webstore started (consisting of a LMG gunner and a marksman) and then didn’t use their bergens. This was so the figures could pull double duties with the SAS Low Profile team (the packs themselves ended up in the hands of several British squaddies). Having just stripped the early paint job, now seemed a great time to give them an upgrade.
The LMG gunner took the biggest pack while the marksman got a smaller pack put a pair of LAWs ready to knock out tanks (and to cover the joins). The packs have two parts of the strap at the top and, although they don’t fit as well as the original, they do look pretty effective. Even better, they work well with the rest of the squad making them look as heavily laden as their buddies.
The other first use is adding some detail to my 2nd Razor. I cover this in the second Razor post but it went into place very easily, requiring almost no clean up while making it look like it latched over the top of the frame.
For the future? Some of the boxes will be going on my existing weapon teams to give them somewhere to store the ammo while others will be saved to really laden down a few upcoming releases. I’m also looking at getting the plasticard out and making some fillers for the truck bed covered in gear – perfect for supply vehicles or objectives.
In the end, I think this stowage pack is one of the best on the market. There are lots of bits you would end up using and its a worthwhile purchase for anyone wanting to add a little extra to their vehicles, soldiers or terrain. When combined with the ammo boxes already out, it will be easy to give everything the right level of clutter.
(Hey everyone, as a special treat thanks to me hitting over 2500 views this month, I thought I would bring a post back from the future and put it out on this Bank Holiday Monday)
There is something about a toy lorry that takes you back to being a kid. Of course, as a wargamer, you then want to skirmish around them and use them as terrain. You could go and get a diecast truck from the toy shop but there is an alternative if you want to get them even cheaper. TTCombat does several vehicles (including armoured trucks and a taco van) and all for a good price. I picked up two of these HGVs ready for the tabletop and was very excited to get started on them.
The HGV comes on two sheets of laser cut MDF, as well as an instruction sheet and a front page showing a completed model. Removing the pieces is easy – the laser cutting in the MDF is spot on, leaving only two corner bits still attached. A quick twist and the pieces separate needing only a minor bit of pruning to get them in shape.
The main body of the truck is a long thin baseboard and the shorter squatter upper level that forms the bottom of the cargo bay. From here, the upper panels are attached to form the box structure. The only niggle with this is that the upper part of the wheels protrude into the cargo section, leaving them exposed if you choose to open the back doors. I’d recommend either leaving the doors sealed closed or be willing to break the MDF out and tweak the inside.
Speaking of the wheels, each wheel unit is made up of an axle with two connecting tabs (for the body) and two rods, two plain wheel plates that attach to the rods and two detailed wheel plates that fit onto of the plain ones. I am not 100% sure about the assembly on the wheel – should the inner and outer be lined up or alternating? There seems to be a mixture on the site between the vehicles so I would guess it’s down to personal preference (I went with matching).
Once the rear box is done, the front section is then added. I did a quick trim down to the bottom tab on the front panel as it didn’t seem to fit 100% but in the end it was all alright. The lid for the cab is removable so you could leave it unglued to allow placement of crew figures. There is a tiny gap where the upper and lower windscreen meet but it’s barely visible.
So as you can see in at this point the crew compartment is visible and accessible. However, as the rest of the vehicles in my collection have painted over windows and the cab is a massive space lacking in detail, I decided to fill in the gaps using off cuts from my spare pile of MDF. This was super easy, thanks to plenty of space on the inside. Just make sure you pop the slots out for the mirrors before you glue the interior panels in place.
Add on a few detail pieces (headlights, mirrors and the grill) and the kit is done. Now for the pictures you all wanted!
The rear shows the detailing for the lights. This is actually slightly cut out of the MDF, so it should still be visible once the basecoat is applied. There is also details on the rear door and the number plate.
At the front you can see the details on the grill, more cut in details on the lights and the wipers in place. Comparison time. Here it is next to the Foxhound (now undercoated) and standard reference figure from Empress. It’s a big old vehicle, slightly oversized for 28mm so it fits with 35mm games but should still be fine as a terrain piece.
The container is slightly smaller than the truck’s cargo bay. You could use the truck as a starting point for a container carrier but you would need to build a bed that sits over the top of the wheels.
The truck kit costs £5.95 from TTCombat and I think it’s worth every penny. There are a few places where some tweaks had to be made but the end result is a really solid HGV that is great to play around. It’s a good starting point if you’re wanting to make some more decorative like an Afghan Jingle truck requiring less of the prep work that a diecast replica would need. Overall, I’m very happy with my purchase.
Now, if only I had some sort of depot for them to park up in and load cargo from…
Salute saw me picking up a few things, one of which was a very exciting upcoming release from Spectre Miniatures. For months we have been teased with render and prototype images of perhaps the most complex kit they have produced. Perfect for Spectre games of special operations, this new vehicle will be perfect to transport your operators around the board at high-speed.
I am of course talking about the Razor, the lightweight 4WD that has been recently introduced into use by the US Special Forces Community. Airportable and capable of transporting four troops across rough terrain with all their kit.
As much as I can talk about the real life thing, what’s more important is how the kit is. I need to first mention that I built mine without the instructions sheet that is coming along soon (probably when they are put onto the Spectre site for sale). As a testament to the guys at Spectre, they have done an excellent job, packing the resin and metal kit with detail and minimising the number of fiddly bits.
The parts split into a mixture of resin (main chassis and wheels) and metal (everything else). There are some cool design features (seats at the back have a recessed bottom, seats in the front have an exposed plug to slot in place) and it’s mostly simple to put together once you start using the locator blips on the underside. As with all kits, a dry run is a great place to start.
The reason why this is a preview and rather than a review is that I’m waiting for a few additional items before I paint it up and get it into action. Spectre have mentioned crew and stowage are coming and this is a vehicle that is begging to be covered in gear.
As you can see at the back, I was a little overzealous with my trimming when trying to fit the outer suspension legs (something I’ll fix before painting). The rear section required a bit of dry fitting to put into place, working out its exact arrangement. However, this should be much easier when following the instructions
A view of the underside shows off the wheel arrangement and the join between the two pieces of chassis. Most of the seam is hidden out of sight thanks to positioning under the front console.
Not a great picture, but it does show a pretty good view of the dashboard and it’s detail. The M240 will sit on the right hand side on a two-part arm, giving it a wide range of positions.
So comparison time. As you would expect, it’s quite a bit smaller than most of the other vehicles currently available.
Comparing against the Spectre SUV and Technical Alpha, the Razor is tiny.
This is even more obvious when compared to a fellow vehicle in US arsenal, the Humvee (this one from Empress).
Finally, lets look at who else will be using it. Model on the left is a Spectre Tier 1 Operator. Model on the right is an Empress US Army Ranger.
To conclude, I think this is one of my favourite releases from Spectre. For such a small vehicle it has a very nice weight to it, prompting none of the fear you would normally have with something this small; I can’t see it being knocked off the table by a stray arm. It was fun to put together and now just needs some final details. Then it will be off to go cruising round the deserts of Bazistan.
As for its role in the game, it’s going to be a taxi – getting your team in to do the mission and then back out again. As you can see, there isn’t much armour so leaving it exposed is an invitation for anyone with an explosive weapon. However, the MMG and crew guns will put some fire down and you can always just drive really fast. Just remember to leave a space for any “buddies” you might want to pick up.
Final thought? I’ll probably be getting a second one for the rest of the squad once they are available to everyone.
As mentioned in my previous post on the Spectre technicals, I hadn’t picked up all the weapons. As part of my cartel order, I put on two more weapons ready to give the bad guys something else to handle my Challenger 2 or other armoured vehicles.
The common thing between these two is the base. Simply, the base is plasticard with slots cut out for the wheel arches. Main tweak is cutting the gap slightly longer so the base can be put in either way, allowing for some adjustment.
The TOW is a wire guided missile, used worldwide as tank killer as well as hammering bunkers when the gunners run out of targets. As dangerous as it is, the wire guided nature put the crew at risk until it impacts unless they cut the guidance wire early.
The Spectre kit is in three pieces – the launcher and sight, the base and two tripod legs and the third leg. Construction is simple – attach tripod leg, add launcher. The only tweak I ended up doing was I trimmed down two of the feet on the tripod so I could fit it easily onto the base.
As for crew, I added Crew Charlie and Crew Delta. Charlie is designed for the launcher while delta is intended for the SPG9. However, I think he works well as the loader. Now just to assemble a round to reload…
The M40 is a heavy recoilless rifle, launching a 105mm projectile to smash armour and the predecessor to the TOW. It lacks the guidance and doesn’t have the penetration of a TOW but it still packs a punch.
The Spectre model comes in four pieces – the main tube, the elevation wheel, the tripod and the wheel. Again, super simple assembly.
To crew it, I picked up the set designed for the weapon (Crew Foxtrot) and set them in place. I’m a big fan of the guy holding the next round.
As with the previous weapons, Spectre has done a great job making these systems. Both are packed full of detail and the crew are great additions to them. It was also super easy to mount them on quick swap bases with only minor alterations. I still have a few more systems to look at but at least now the Militia have some heavy support on the field.